Product Overview for Container Heaters and gas bottle heaters

Drum and container heaters are used to heat up liquids in drums, canisters, buckets, hobbocks and IBC containers. Depending on the application, different amounts of heat are introduced to keep the contents at an optimum processing temperature. Thereby the viscosity can be reduced to allow for easy pumping and crystallisation can be avoided. Gas bottle heaters are used to heat compressed gas cylinders, e.g. to prevent icing at a large withdrawal rate and thereby to avoid negative effects on the required gas flow.

Features 
  
 
Drum heaters, IBC heaters and gas bottle heaters are flexible heating jackets, that are intalled directly on the container. Thus they allow a very efficient and space-saving heating directly on site. The even laying of the heating cable as well as a cosumized temperature control avoid overheating of the container and its contents. The robust design and high quality materials and components ensure a safe and reliable operation.

ATEX drum heater series WEXHD

Drum heaters are used for protection against frost, temperature maintenance and process heating in the temperature range from -40 °C to +200 °C

  • System-approved with an EC-type examination certificate
  • Standard and customer-oriented solution - the heating jacket is customized according to the required drum heater dimensions
  • Robuster, flexibler und ableitfähiger Aufbau für den Einsatz im Innen- und Außenbereich
  • Delivered completely configured and ready to use immediately without further acceptance procedures
  • Ambient temperatures from -40 °C to + 60 °C
  • Protection class: gas IP65 
  • Temperature class: T6, T5, T4, T3
  • Extensive documentation for the explosion protection document

Product description
Instructions for installation and operation
EU declaration of conformity
EC-type examination certificate

Drum Heaters P-Series, type WODPX

Suitable for all types and makes of 200 - 220 L steel drums. For tempering up to 90 °C.

  • Outer sheath made of water-repellent polyester fabric
  • Fastening by strong tension straps with adjustable snap locks and two fastening straps (included). The tight fit prevents the drum heater from slipping during operation
  • Heating with fluoropolymer-insulated heating cable in pockets
  • Nominal power 230 VAC (±10%); IP54; appliance class I and II
    (other voltages on request)

Temperature Controller:

Drum Heater with capillary tube thermostat, has an on/off switch, 2 control lamps and 5,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary), the thermostat switches off permanently and therefore prevents uncontrolled heating.

Drum Heater with round plug 6+PE, for connection to our temperature controllers, which are available for wall mounting (W-500 series) or integrated in the connection cable (L-300 series). The precise temperature control can protect your ingredients from overheating. The modular concept allows separate purchase and exchange.

Datasheet: Drum heater with capillary tube thermostat

Drum Heaters P-Series, type WODP0

Suitable for all types and manufacturers of cylindrical or cambered plastic drums. For tempering up to 90 °C.

  • Outer sheath made of water-repellent polyester fabric
  • Fastening by strong tension straps with adjustable snap locks and two fastening straps. The tight fit prevents the drum heater from slipping during operation
  • Heating with fluoropolymer-insulated heating cable in pockets
  • Nominal power 230 VAC (±10%); IP54; appliance class I and II
    (other voltages on request)

Temperature Controller:

Drum Heater with capillary tube thermostat, has an on/off switch, 2 control lamps and 5,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary), the thermostat switches off permanently and therefore prevents uncontrolled heating.

Drum Heater with round plug 6+PE, for connection to our temperature controllers, which are available for wall mounting (W-500 series) or integrated in the connection cable (L-300 series). The precise temperature control can protect your ingredients from overheating. The modular concept allows separate purchase and exchange.

Datasheet: Drum heater with capillary tube thermostat

Drum Heaters series WODH

For steel drums of all types and manufacturers from 30 to 220 litres. For heating and tempering up to 200°C.

  • Outer sheath made of PTFE-coated, silicon-free glass fibre fabric
  • Fastening by robust tension straps with adjustable snap locks and fastening hooks (included).
  • Heating with fluoropolymer-insulated heating conductor with protective conductor braiding
  • Power rating 230 VAC (± 10%); IP54 protective standard; protective class 1
    (other voltages on request)                                                                                                                                     

Temperature Controller:

  • Drum heater with capillary tube thermostat, with on/off switch, 2 control lamps and 3,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary), the thermostat remains switched off and therefore prevents uncontrolled heating.
  • Drum heater with 6+PE round plug, for a very precise and safe temperature control with 2 Pt100 (1x controller, 1x limiter), with our optionally available temperature controllers. Increased power of 2000 W and two heating zones. The modular design enables an easy purchase and replacement.

ATEX IBC heaters series WEXHCIBC

IBC heating jackets are used for protection against frost, temperature maintenance and process heating in the temperature range from -40 °C to +200 °C

  • System-approved with an EC-type examination certificate
  • Standard and customer-oriented solution - the heating jacket is customized according to the required IBC container dimensions
  • Robuster, flexibler und ableitfähiger Aufbau für den Einsatz im Innen- und Außenbereich
  • Delivered completely configured and ready to use immediately without further acceptance procedures
  • Ambient temperatures from -40 °C to + 60 °C
  • Protection class: gas IP65 
  • Temperature class: T6, T5, T4, T3
  • Extensive documentation for the explosion protection document 

Product description
Instructions for installation and operation
EU declaration of conformity
EC-type examination certificate

1000l Containerheizer WOCP1000

Container Heaters P-Series, type WOCP

For IBC-Container 1.000 L of all types and manufacturers. For tempering up to 90 °C.

  • Outer sheath made of water-repellent polyester fabric
  • Fastening by robust tension belts with adjustable snap locks and fastening hooks
  • Heating with a fluoropolymer-insulated heating cable in pockets
  • Nominal power 230 VAC (±10%); IP54; appliance class I and II
    (other voltages on request)

Temperature Controller:

Container Heater with capillary tube thermostat, has an on/off switch, 2 control lamps and 5,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary), the thermostat switches off permanently and therefore prevents uncontrolled heating.

Container Heater with round plug 6+PE, for connection to our temperature controllers, which are available for wall mounting (W-500 series) or integrated in the connection cable (L-300 series). The precise temperature control can protect your ingredients from overheating. The modular concept allows separate purchase and exchange.

Datasheet: Container heater with capillary tube thermostat

Winkler EX-Gasflaschenheizer

ATEX gas bottle heaters series WEXHB

Gas bottles heaters are used for protection against frost, temperature maintenance and process heating* in the temperature range from -40 °C to +50 °C

  • System-approved with an EC-type examination certificate
  • Standard and customer-oriented solution - the heating jacket is customized according to the required gas bottle dimensions
  • Robuster, flexibler und ableitfähiger Aufbau für den Einsatz im Innen- und Außenbereich
  • Delivered completely configured and ready to use immediately without further acceptance procedures
  • Ambient temperatures from -40 °C to + 60 °C
  • Protection class: gas IP65 
  • Temperature class: T6, T5, T4, T3
  • Extensive documentation for the explosion protection document

* Note: Please consider the technical rules TRG 310 / TRBS 3145 / TRGS 745 Maximum operating temperature 50 °C (cylinder temperature)

Product description
Instructions for installation and operation
EU declaration of conformity
EC-type examination certificate

Winkler Fassheizer WODS

Silikon Drum Heater S-Series

For steel drums of all types and manufacturers from 30 to 220 litres. For heating and tempering up to 120 °C

  • Outer jacket made of silicon-coated glass fibre mat with moisture protection and chemical-resistant surface (washable)
  • Simple fastening through tension spring and hook
  • PFA-Coated heating cable
  • Operating volatege 230 VAC (± 10 %); IP54 protection class; appliance class II                         (other voltages possible on request)
  • Temperature control with capillary tube thermostat 0-120 °C with on/off switch, 2 control lights and 3,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary) the thermostat switches off permanently.

Data sheet

Canister Heater P-Series, type WODPK

Suitable for all types and makes of plastic canisters 30 L. For tempering up to 90 °C.

  • Outer sheath made of water-repellent polyester fabric
  • Fastening with velcro fasteners
  • Heating with fluoropolymer-insulated heating cable in pockets
  • Nominal power 230 VAC (±10%); IP54; appliance class I and II
    (other voltages on request)

Temperature Controller:

Canister Heater with capillary tube thermostat, has an on/off switch, 2 control lamps and 5,0 m connection cable with plug. If the measuring system is damaged (pressure drop in the capillary), the thermostat switches off permanently and therefore prevents uncontrolled heating.

Canister Heater with round plug 6+PE, for connection to our temperature controllers, which are available for wall mounting (W-500 series) or integrated in the connection cable (L-300 series). The precise temperature control can protect your ingredients from overheating. The modular concept allows separate purchase and exchange.

Insulations Jackets

For barrels, containers or other diffrent shapes to protect your ingredients from cooling or cold weather.

  • Outer jacket made of water-repellent polyester fabric or washable PTFE fabric (optional)
  • Fastening by robust tension straps with adjustable snap locks or hooks
  • The tight fit prevents the insulating jacket from slipping off.
  • Edge protection against wear
  • Easy and quick installation by one person
  • Standard sizes deliverable quickly

Data sheet with your container size or shape not found? No problem, we also offer customized solutions on request!

Service